Engineering, 02.06.2020 16:58 debbys1802
A manufacturer of pressure vessels is worried about his steel fracturing abruptly as the chambers are loaded to high pressures because the steel is heavily cold-rolled with a very high yield strength (σy > 1 GPa). He decides to measure the fracture toughness of his steel using a thick-compact tension sample (Y = 1.12). He puts a 100 µm crack in the specimen, loads it in tension, and measures a fracture toughness of 10 MPa m^1/2.
a. What was the fracture stress during this experiment?
Answers: 2
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
Engineering, 06.07.2019 03:30
Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?
Answers: 1
Engineering, 06.07.2019 04:20
Assume that you are asked to perform a boring operation on a large-diameter hollow workpiece. would you use a horizontal or a vertical boring mill?
Answers: 3
A manufacturer of pressure vessels is worried about his steel fracturing abruptly as the chambers ar...
Mathematics, 13.05.2021 19:20
Mathematics, 13.05.2021 19:20
Mathematics, 13.05.2021 19:20
Mathematics, 13.05.2021 19:20
History, 13.05.2021 19:20
Mathematics, 13.05.2021 19:20
Mathematics, 13.05.2021 19:20
Mathematics, 13.05.2021 19:20
English, 13.05.2021 19:20