subject
Engineering, 31.05.2020 04:57 foreverisabel

Ou wish to pilot a small boat across to a buoy which is anchored to the bottom of the bay. There is a current that flows at the angle θ = 28.5 shown at 3.0 m/s. The boat starts out directly across from the buoy, a distance d of 370.0 m away. You choose to steer your boat straight across, aiming the front of the boat in the +y-direction. You notice that the boat's speedometer reads 6.0 m/s. The boat ends up to the right of the buoy at the point shown.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
question
Engineering, 04.07.2019 19:20
Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c
Answers: 3
question
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
You know the right answer?
Ou wish to pilot a small boat across to a buoy which is anchored to the bottom of the bay. There is...
Questions
question
Biology, 17.12.2020 21:10
question
Computers and Technology, 17.12.2020 21:10
question
History, 17.12.2020 21:10
question
History, 17.12.2020 21:10
question
Mathematics, 17.12.2020 21:10