subject
Engineering, 26.05.2020 21:01 dub7

9. Technician A says to examine each bearing carefully for chips, pits, and scratches during servicing. Technician B says that discoloration of a bearing
Indicates normal, acceptable wear. Who is correct?
A. Technician A only
B. Technician B only
©C. Both Technician A and B
D. Neither Technician A nor B

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
9. Technician A says to examine each bearing carefully for chips, pits, and scratches during servici...
Questions
question
Mathematics, 06.10.2019 06:30