Engineering, 23.05.2020 04:01 lyndah15
A heated plate is built into the wall of a large room. The room is maintained at 300K. The exposed surface of the plate is maintainedat 400 K by a heater attached to the back of the plate. Assume the sides of the plate and back of the heater are perfectly insulated. The exposed surface of the plate (area 0.1 m2) has an emissivity of 0.3 and a convection heat transfer coefficient of 6 W/m2K with the room and air temperature of 300 K. You need to show radiation resistance circuit for this problem and draw a picture with a control volum.
Find the net radient heat flux from the plate surface.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
You know the right answer?
A heated plate is built into the wall of a large room. The room is maintained at 300K. The exposed s...
Questions
Mathematics, 02.11.2019 21:31
Mathematics, 02.11.2019 21:31
Biology, 02.11.2019 21:31
Computers and Technology, 02.11.2019 21:31
SAT, 02.11.2019 21:31
Mathematics, 02.11.2019 21:31
Chemistry, 02.11.2019 21:31
