subject
Engineering, 21.05.2020 01:07 vanderrage

RG-19/U is used at 100 Mhz with an input power of 10 mW. The combined system losses add up to 50 dB. If RG-19/U has an attenuation of 22.6 dB/km. (a) Compute the sensitivity of the receiver and the maximum length of the communication link. (b) What is length required if fiber with 4 dB/km replaces the coaxial cable. (c) Determine the number of photons per second that the receiver received if the carriers operate at wavelength of 1500 nm. ctor is 0.80. What is the optical modulation factor in this circuit at the 3-dB frequency (f3-dB)?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
You know the right answer?
RG-19/U is used at 100 Mhz with an input power of 10 mW. The combined system losses add up to 50 dB....
Questions
question
English, 02.08.2019 17:00