Engineering, 13.05.2020 04:57 hbhdnjdndj1867

Consider a catchment that has a total area of 2.1 acres. Runoff from the entire catchment flows into one pipe inlet. Part of the catchment is a softball field (1.5 ac) and the other part is a set of paved tennis courts (0.6 ac). The softball field has a C value of 0.3 and a time of concentration of 7 minutes, and the paved area has a C value of 0.95 and a time of concentration of 2 minutes. The IDF curve is given by i =100/(tc + 10) where i is in in/hr and tc is in minutes. Determine the design storm intensity and flow rate for the following cases: (a) The usual method based on the entire drainage area contributing to flow. (b) A modified method that assumes that only the paved tennis courts contribute to flow. (c) A different modified method that assumes a time of concentration of 2 minutes, and an approximation that the entire tennis court region contributes flow and 2/7 of the softball region contributes flow. Comment on the results and their impact on design. Is it always best to use method (a)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

Answer

You know the right answer?

Consider a catchment that has a total area of 2.1 acres. Runoff from the entire catchment flows into...

Questions