Engineering, 07.05.2020 03:59 drippyc1363

The semiconductor is a homogeneous, p-type material in thermal equilibrium for t ≤ 0. The excess minority carrier lifetime is 10^-6 ns. At t = 0, an external source is turned on which produces excess carriers uniformly at rate of g'=1020 cm^-3s^-1. At t = 210^-6 s , the external source is turned off.

(a) Derive the expression for the excess-electron concentration as a function of time for 0 ≤ t ≤[infinity].

(b) Determine the value of excess electron concentration at (i) t = 0, (ii) t = 210^-6 s , (iii) t = 3*10^-6 s and (iv) t = [infinity].

(c) Plot the excess electron concentration as a function of time.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

Answer

You know the right answer?

The semiconductor is a homogeneous, p-type material in thermal equilibrium for t ≤ 0. The excess min...

Questions