subject

Engineering, 05.05.2020 17:37 htx88

12. A structural component is fabricated from an alloy that has a plane strain fracture toughness of It has been determined that this component fails at a stress of 300 MPa when the maximum length of a surface crack is 0.95 mm. What is the maximum allowable surface crack length (in mm) without fracture for this same component exposed to a stress of 300 MPa and made from another alloy with a plane-strain fracture toughness of 35 MPa m (31.9 ksi in. ). 40 MPa m (36.4 ksi in. ). 45 MPa m. 57.5 MPa m

ansver

Answers: 2

Show answers

Another question on Engineering

question

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

question

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

question

Engineering, 04.07.2019 19:20

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

question

Engineering, 06.07.2019 03:10

Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj

Answers: 3

You know the right answer?

12. A structural component is fabricated from an alloy that has a plane strain fracture toughness of...

Questions

question

Health, 27.11.2019 06:31

Hans selye’s definition of stress is considered a response-based definition because it conceptualizes stress chiefly in terms of the best action to t...

question

Mathematics, 27.11.2019 06:31

Acompany makes auto batteries. they claim that 84 % of their ll70 batteries are good for 70 months or longer. assume that this claim is true. let p ov...

question

Social Studies, 27.11.2019 06:31

An expectancy of zero means that the personmultiple choice a) does not feel confident in his or her ability to do the job. b) is not motivated. d) is...

question

Physics, 27.11.2019 06:31

Aperiodic vibration at x = 0, t = 0 displaces air molecules along the x direction by smax = 3.1e-05 m. the motion produces a sound wave that travels a...

question

Business, 27.11.2019 06:31

Disney starts off its stars with disney channel shows, records them on the disney-owned hollywood record label, plays the songs in heavy rotation on r...

question

Social Studies, 27.11.2019 06:31

In the context of organizational justice, perceptions of involve the process by which rewards or punishments are administered. a) interactional justi...

question

Social Studies, 27.11.2019 06:31

If you were a student during jane elliot’s famous demonstration on prejudice with her third grade students in the 1970s, you would have...

question

Mathematics, 27.11.2019 06:31

[probability] there are four people in a room that haven't met before. they are told to shake hands, exactly once, of every other person in the room s...

question

Engineering, 27.11.2019 06:31

The expression with an and operator when the expression on its left is false and so it does not evaluate the expression on its right....

question

Physics, 27.11.2019 06:31

Using the equation for the final velocity in terms of masses and initial velocity of the gliders for a perfectly inelastic collision, work out the fin...

question

Chemistry, 27.11.2019 06:31

Let 4 moles of methanol (liquid) combust in 3 moles of gaseous oxygen to form gaseous carbon dioxide and water vapor. suppose this occurs in a chamber...

question

Mathematics, 27.11.2019 06:31

Adata set includes data from 500 random tornadoes. the display from technology available below results from using the tornado lengths? (miles) to tes...

question

Business, 27.11.2019 06:31

The analysis tool that lists products in descending order of their individual dollar contribution to the firm is: a. product life cycle analysis. b....

question

Biology, 27.11.2019 06:31

The organisms examined by darwin on the galápagos islands that were most important in his development of the theory of natural selection were:...

question

Computers and Technology, 27.11.2019 06:31

Which user account gets nearly unlimited access to the local system and can perform actions on the local system with little or no restriction?...

question

Physics, 27.11.2019 06:31

Avery small 100-g object is attached to one end of a massless 10-cm rod that is pivoted without friction about the opposite end. the rod is held verti...

question

Business, 27.11.2019 06:31

Under normal conditions, which of the following would be most likely to increase the coupon rate required to enable a bond to be issued at par? a. mak...

question

Mathematics, 27.11.2019 06:31

Let f(x)=15−9x^2+3x^3 input the interval(s) on which f is increasing. input the interval(s) on which f is decreasing.

question

Business, 27.11.2019 06:31

All of the following statements are true about the use of defense tactics by the target firm during a hostile takeover excepta. defense tactics are us...

question

Biology, 27.11.2019 06:31

If you were observing a root every few days and saw that it enlarged and persisted throughout the life of the plant, you would be looking at...

More questions: Engineering Another questions