subject
Engineering, 05.05.2020 14:52 leleee10

Elliot works as an engineer at Master Robotics, one of whose clients is E-Corp, a large industrial conglomerate. Master Robotics has performed multiple projects over a period of several years for this client, and a new project has just started with an expectation to last at least 2 more years. One day Elliot is called by Angela, an E-Corp employee with whom he has not previously worked. She explains that an expensive failure at one of E-Corp’s plants has become a serious embarrassment for the company, and the corporate board of directors has demanded that an external board of review be formed to analyze the problem, suggest solutions, and make its findings public (including to E-Corp’s shareholders) in no more than 6 months. Angela has seen Elliot’s LinkedIn profile and believes that his personal expertise would be very valuable on the external board. During the phone conversation Angela tells Elliot, "I understand that you work for Master Robotics. Let’s try to keep the potential confusion to a minimum. So, let’s hire you as an independent contractor – like a side job – for your work on the external review board. That way no one has to doubt your motivations."

Which of the following engineering ethical principles should be used to determine Elliot’s decisions on how to proceed? (select all that apply)A. Engineers shall hold paramount the safety, health, and welfare of the public. B. Engineers shall issue public statements only in an objective and truthful manner. C. Engineers shall perform services only in the areas of their competence. D. Engineers shall act for each employer or client as faithful agents or trustees. E. Engineers shall uphold and enhance the honor, integrity, and dignity of the profession.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Elliot works as an engineer at Master Robotics, one of whose clients is E-Corp, a large industrial c...
Questions