Design a rod that will have an interference fit so that the allowance (the
maximum interferenc...
Engineering, 03.05.2020 14:17 isaacbryan2416
Design a rod that will have an interference fit so that the allowance (the
maximum interference) is 0.010 with the center hole in the Rocker Arm
and the tolerance on the rod diameter is .002. Sketch a section view of
your rod design. Be sure to specify the tolerance in the diameter
dimension of your design.
Answers: 3
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
English, 12.04.2021 21:40
Chemistry, 12.04.2021 21:40
Mathematics, 12.04.2021 21:40
Physics, 12.04.2021 21:40
Health, 12.04.2021 21:40