Engineering, 05.05.2020 04:24 yeeeeeeeeeeet21

Carbon disulfide has the following physical properties:Flashpoint -22Â°FBoiling point 46.5Â°CDensity 1.261Vapor density 2.64Lower flammable limit 1.3%Upper flammable limit 50%8-hour TWA PEL 20 ppm

An industrial process liberates 3 cubic feet of carbon disulfide per hour into a room that measures 10 feet by 20 feet and has a ceiling height of 8 feet.

(a) Calculate the minimum general exhaust ventilation (cubic feet/hour) necessary to prevent a general safety hazard for the process.
(b) Calculate the minimum general exhaust ventilation (cubic feet/hour) necessary to prevent a general health hazard for the process.
(c) Carbon disulfide is which of the following: 1. Class IA flammable liquid 2. Class IB flammable liquid 3. Class IC flammable liquid 4. Class II combustible liquid 5. Class III combustible liquid

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain

Answers: 2

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

You know the right answer?

Carbon disulfide has the following physical properties:Flashpoint -22Â°FBoiling point 46.5Â°CDensity...

Questions