Engineering, 05.05.2020 06:17 fymdes2001

A pipe of 10 cm inner diameter is used to send crude oil over distance of 400 meters. The entire pipe was laid horizontal. The viscosity of the oil is 10 cp. The density of oil is 800 kg/m3 . a. (20 pts) The desired volumetric flow rate is 0.1 m3 /min. What is the Reynolds number of this flow? Is the flow laminar or turbulent? What is the pressure difference needed to generate this flow rate? b. (15 pts) Three month later, the operator found that they had to triple the pressure difference to maintain the flow rate at 0.1 m3 /min. The operator thought that wax deposition from the oil had reduced the inner diameter of the tube. Based on this assumption, can you estimate the reduced inner diameter of the tube? What is the Reynolds number of the flow?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

You know the right answer?

A pipe of 10 cm inner diameter is used to send crude oil over distance of 400 meters. The entire pip...

Questions