Engineering, 05.05.2020 07:31 zfismael

Cubic shape gel beads of 8 mm on a side contains residual solvent from the gel-casting process. Initially the bead contains 0.20 % of residual solvent uniformly distributed within the polymer. The residual solvent will be removed from the bead by drying the beads in a fluidized bed of fresh air. The air flow though the fluidized bed is very high so that convective mass transfer resistance is negligible (i. e. Kc is extremely high). a. What is the residual concentration at the surface of the bead after 50 hrs? Use, DAB = 4X10-7 cm2 /s. b. If this geometry is approximated as a semi-infinite medium, how long it will take for the solvent to reach 0.18% composition at a depth of 0.1 mm from the surface of the bead. Please solve taking the system as a semi-infinite medium

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

Answer

You know the right answer?

Cubic shape gel beads of 8 mm on a side contains residual solvent from the gel-casting process. Init...

Questions