Engineering, 05.05.2020 09:05 kroe417

A plane wall (k = 1 W/mK) has a thickness of 0.3 m, height of 2 m, and width of 1 m. It undergoes uniform volumetric heat generation of 1,000 W/m3. The left side of the wall is insulated and the right side is cooled via convection with a heat transfer coefficient of 5 W/m2K and an air temperature of 25Â°C. Fins (k = 1 W/mK) are attached to the right hand side of the wall (fins do not generate heat). The fins are rectangular and span the width of the wall with a thickness of 10 mm and a length of 75 mm. The spacing between fins along the heigth of the wall is 20 mm.

find the temperature of the wall in contact with the air (the base of the fins).

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

You know the right answer?

A plane wall (k = 1 W/mK) has a thickness of 0.3 m, height of 2 m, and width of 1 m. It undergoes un...

Questions