Engineering, 05.05.2020 18:06 Annabel9554
For a very rough pipe wall the friction factor is constant at high Reynolds numbers. For a length L1 the pressure drop over the length is Δp1. If the length of the pipe is then doubled, what is the relation of the new pressure drop Δp2 to the original pressure drop Δp1 at the original mass flow rate?
delta P2=?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
For a very rough pipe wall the friction factor is constant at high Reynolds numbers. For a length L1...
Questions
Mathematics, 03.10.2021 07:30
English, 03.10.2021 07:30
History, 03.10.2021 07:30
Mathematics, 03.10.2021 07:30
Mathematics, 03.10.2021 07:30
Geography, 03.10.2021 07:30
History, 03.10.2021 07:30
Mathematics, 03.10.2021 07:30
Physics, 03.10.2021 07:30
Chemistry, 03.10.2021 07:30
