Engineering, 05.05.2020 20:03 major126
Determine the carburizing time necessary to achieve a carbon concentration of 0.30 wt% at a position 4 mm into an iron–carbon alloy that initially contains 0.10 wt% C. The surface concentration is to be maintained at 0.90 wt% C, and the treatment is to be conducted at 1100°C. Use the diffusion data for γ-Fe.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
Determine the carburizing time necessary to achieve a carbon concentration of 0.30 wt% at a position...
Questions
Mathematics, 10.07.2019 09:30
History, 10.07.2019 09:30
Mathematics, 10.07.2019 09:30
Mathematics, 10.07.2019 09:30
Mathematics, 10.07.2019 09:30
Mathematics, 10.07.2019 09:30
Chemistry, 10.07.2019 09:30
Mathematics, 10.07.2019 09:30
Mathematics, 10.07.2019 09:30
Mathematics, 10.07.2019 09:30
