Engineering, 06.05.2020 02:09 dorindaramirez0531

Propane gas C3H8 enters a combustion chamber operating at steady state condition at 1 bar, 25ºC and is burned with 150% theoretical air that enters the combustion chamber at the same state. The products leave the combustion chamber at 1 bar and 1200 K.
a) Write down the balanced chemical equation for the complete combustion.
b) Write down the balanced actual combustion reaction and calculate c) the air fuel ratio on a mass basis, d) the dew point temperature of the products in ºC, e) the heat transfer in terms of kJ/kmol of fuel.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

You know the right answer?

Propane gas C3H8 enters a combustion chamber operating at steady state condition at 1 bar, 25ºC and...

Questions