subject
Engineering, 06.05.2020 02:05 brendacauani12345

A surface water source has a total dissolved solids (TDS) concentration of 400 mg/L and is to be treated with reverse osmosis to produce a water that is 25 mg/L (TDS). If the membrane has an average salt rejection ratio of 0.95, what water recovery ratio should the membrane system achieve?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
You know the right answer?
A surface water source has a total dissolved solids (TDS) concentration of 400 mg/L and is to be tre...
Questions
question
Mathematics, 14.12.2021 18:30
question
Mathematics, 14.12.2021 18:30
question
Mathematics, 14.12.2021 18:30