subject
Engineering, 06.05.2020 05:07 JazminFarris1038

In the apparatus, the Dynamic Aqua Crusher, water is injected into a vertical channel at a volume flow rate Q. The diameter of the channel at point 1 is d, and its diameter at point 2 is D. To the right of point 2 is a horizontal channel blocked by a stopper. The small diameter of this horizontal channel is d, and the large diameter is D. To the right of the stopper is a chamber with static water. When the stopper is clamped in place by a screw, the pressure in the chamber is p0. When the clamp is unscrewed, the stopper is free to move. At the right-hand end of the chamber is a ram that can be used to crush things against a wall. Let be the density of water, p1 be the pressure at point 1 in the vertical channel, and H be the vertical distance between points 1 and 2. You may assume that p1 > p0.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
You know the right answer?
In the apparatus, the Dynamic Aqua Crusher, water is injected into a vertical channel at a volume fl...
Questions
question
Mathematics, 23.10.2019 18:10