subject
Engineering, 06.05.2020 06:35 firstone04kr

Develop a spreadsheet using the Modified Puls method to route runoff through the specified pond configuration: Storage - At a stage of 0 ft (brim full), the pond has an area of 1 acre. From a stage of 0 ft to a stage of 3 ft, the pond increases to an area of1.5 acres. From a stage of 3 to 5 ft, the pond increases to an area of 2.25 acres. The stage should not increase above 5 ft Hint: develop an equation for this stage-area relationship for use in spreadsheet Hint: After areas are calculated for each stage, they must be converted to storage iven, see attached spreadsheet The pond has an outlet structure with a 6 inch orifice with the invert set at a stage of 0 The pond has a weir set at a stage of 2 that is 6 feet long Change int5 min Deliverables a) Draw a cross section of the pond showing the changes in pond size as the stage increases. Include a cross section of the outlet structure showing the two outlets set at the correct stage b) Develop a stage / storage relationship for the pond from a stage of 0 to 5 ft. c) Develop a stage / discharge relationship for the pond from a stage of 0 to 5 ft d) Develop a graph showing the relationship between outflow and 2S*/dt + O+ e) Use the attached table as a guide to route the given inflow hydrograph through the system (note, continue the routing until outflow stops or recedes to a very lovw eve f) Graph the inflow and outflow hydrographs on top of one another *provide items b, c, d, e and f as tables or graphs as appropriate

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Develop a spreadsheet using the Modified Puls method to route runoff through the specified pond conf...
Questions
question
Mathematics, 05.03.2021 18:20
question
Mathematics, 05.03.2021 18:20
question
Mathematics, 05.03.2021 18:20
question
English, 05.03.2021 18:20