Engineering, 06.05.2020 08:28 jason9394
A cold air-standard Diesel cycle has a compression ratio of 18 and a cutoff ratio of 1.5. Determine the maximum temperature of the air and the rate of heat addition to this cycle when it produces 150 kW of power and the state of the air at the beginning of the compression is 90 kPa and 57 °C. Use constant specific heats at room temperature.
Answers: 2
, 
![\eta_{th} = \left\{1 - \frac{1}{r^{k-1}} \cdot \left[\frac{r_{c}^{k}-1}{k\cdot (r_{c}-1)} \right]\right\}\times 100\%](/tpl/images/0648/2765/5dba2.png)
and 
are the compression and cutoff ratios, respectively.![\eta_{th} = \left\{1-\frac{1}{18^{0.4}}\cdot \left[\frac{1.5^{1.4}-1}{1.4\cdot (1.5-1)} \right] \right\}\times 100\%](/tpl/images/0648/2765/bd7de.png)
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A cold air-standard Diesel cycle has a compression ratio of 18 and a cutoff ratio of 1.5. Determine...
Questions
History, 16.07.2019 09:20
Computers and Technology, 16.07.2019 09:20
Social Studies, 16.07.2019 09:20
Social Studies, 16.07.2019 09:20
Chemistry, 16.07.2019 09:20
Biology, 16.07.2019 09:20
English, 16.07.2019 09:20
Biology, 16.07.2019 09:20
History, 16.07.2019 09:20
Arts, 16.07.2019 09:20
Spanish, 16.07.2019 09:20
Social Studies, 16.07.2019 09:20
