Engineering, 25.04.2020 01:17 gmac24

Consider an R-134a vapor-compression refrigeration cycle used to maintain a cold region at temperature To when the ambient temperature is TH = 80°F. The saturated vapor enters the compressor at 15°F below Tc, and the compressor operates adiabatically with an isentropic efficiency of 80%. The saturated liquid exits the condenser at 95°F. There is no pressure drops through the evaporator or condenser, and the refrigerating capacity is 1 ton. In this problem, you will select the value of Tr. Select a value for T, between -20°F and 20°F. (a) Plot the T-s diagram. (b) Determine the mass flow rate of the refrigerant in lb/min. (c) Determine the coefficient of performance. (d) Determine the maximum coefficient of performance when a Carnot refrigerator operates between thermal reservoirs at the ambient temperature (TH) and the temperature you selected for the cold region (To). Compare this coefficient with that obtained in part (c). (e) Determine the coefficient of performance if this system is used as a heat pump for heating a building.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

You know the right answer?

Consider an R-134a vapor-compression refrigeration cycle used to maintain a cold region at temperatu...

Questions