subject
Engineering, 24.04.2020 20:52 dbn4everloved

A fluid flows by gravity down an 8-cm galvanized iron pipe. The pressures at the higher and lower locations are 120 kPa and 140 kPa, respectively. The horizontal distance between the two locations is 30 m, and the pipe has a slope of 1m rise per 10 m of run (horizontal distance). For a fluid with a kinematic viscosity of 10-6 m2 /s and a density of 900 kg/m3 , determine the flow rate (in m3 /s).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
A fluid flows by gravity down an 8-cm galvanized iron pipe. The pressures at the higher and lower lo...
Questions
question
Mathematics, 23.04.2020 22:17
question
Mathematics, 23.04.2020 22:18