Engineering, 24.04.2020 20:28 berniceallonce22
A 10-m-long pipe has an inside radius of 70 mm, an outside radius of 80 mm, and is made of stainless steel (k 5 15 W/ [m 8C]). Its inside surface is held at 1508C, and its outside surface is at 308C. There is no heat generation, and steady-state conditions hold. Compute the rate at which heat is being transferred across the pipe wall.
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
A 10-m-long pipe has an inside radius of 70 mm, an outside radius of 80 mm, and is made of stainless...
Mathematics, 30.01.2021 16:30
Social Studies, 30.01.2021 16:30
English, 30.01.2021 16:40
Mathematics, 30.01.2021 16:40
Law, 30.01.2021 16:40
Computers and Technology, 30.01.2021 16:40
Physics, 30.01.2021 16:40