Provide mask values to complete the following lines of code. These lines of code appear at the beginning of the interrupt handler for Timer 4A to process a capture event interrupt (in input edge-time mode). Use friendly code that preserves unused bits. Write your answer in hex. Do not include leading zeros, e. g., Ox01 should be written as Ox1. if ((TIMER4_MIS_R & mask1) TIMER4_ICR_R = mask2; maski (in hex): mask2 (in hex):

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody