subject
Engineering, 23.04.2020 17:23 WonTonBagel

A circular disk of diameter Di 20 mm is located at the base of an enclosure that has a cylindrical sidewall and a hemispherical dome. The enclosure is of diameter D-0.5 m, and the height of the cylindrical section is L 0.3 m. The disk and the enclosure are black and at temperatures 1000 K and 300 K, respectively.

(a) What is the net rate of radiation exchange between the disk and the hemispherical dome?
(b) What is the net rate of radiation exchange between the disk and top third of the cylindrical section (e. g. the section of the cylindrical sidewalls between the hypothetical surfaces Azand A3)?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
You know the right answer?
A circular disk of diameter Di 20 mm is located at the base of an enclosure that has a cylindrical s...
Questions
question
Mathematics, 16.07.2019 21:50