Engineering, 23.04.2020 16:31 Kimmie2019
A round casting is 0.2 m (7.9 in.) in diameter and 0.75 m (29.5 in.) in length. Another casting of thesame metal is elliptical in cross section, with a major-to-minor axis ratio of 2, and has the same lengthand cross sectional area as the round casting. Both pieces are cast under the same conditions. What isthe difference in the solidification times of the two castings?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
You know the right answer?
A round casting is 0.2 m (7.9 in.) in diameter and 0.75 m (29.5 in.) in length. Another casting of t...
Questions
Mathematics, 05.10.2020 01:01
Mathematics, 05.10.2020 01:01
English, 05.10.2020 01:01
Mathematics, 05.10.2020 01:01
Geography, 05.10.2020 01:01
History, 05.10.2020 01:01
Mathematics, 05.10.2020 01:01
