Engineering, 22.04.2020 19:52 dawsoncollins4117

Each of the two drums and connected hubs of 13-in. radius weighs 210 lb and has a radius of gyration about its center of 30 in. Calculate the magnitude of the angular acceleration of each drum. Friction in each bearing is negligible.

Answers: 2

Show answers

Answers

Answer from: nakarelinp0p303

Complete Question

The diagram for this question is shown on the first uploaded image

The angular acceleration for first drum $\alpha = 0.792 rad/s^2$

The angular acceleration for the second drum is $\alpha =1.262$

Explanation:

From the question we are told that

Their radius of the drum is $r = 13 in = \frac{13}{12} ft = 1.083ft$ each

The weight is W = 210 lb

The mass is $M = \frac{210 lb}{32.2 ft /s^2} = 6.563\ lb s^2 ft^{-1}$

Their radius of gyration is $z=30 in= \frac{30 }{12} = 2.5 ft$

The free body diagram of a drum and its hub and 30lb and in the case the weight is connect to the hub separately is shown on the second uploaded image

The T in the diagram is the tension of the string

Now taking moment about the center of the the drum P we have

$\sum M_p = I_p \alpha$

=> $T * r = Mz^2 * \alpha$

Where r is the radius ,z is the radius of gyration about the center O , M is the mass of the drum including the hub, and $\alpha$ is the angular acceleration

Inputting

$T * 1.083 = 6.563 * 2.5^2 \alpha$

=> $T = 37.87\alpha$

Considering the force equilibrium in the vertical direction (Looking at the second free body diagram now )

The first on is

$\sum F_y = ma$

=> $30lb - T = m(r \alpha )$

Where m is the mass of the hanging block which has a value of

$m = \frac{30lb}{32.2 ft/s^2} = 0.9317 \ lb ft^{-1} s^2$

a is the acceleration of the hanging block

inputting values we have

$30- 37.87 \alpha = 0.9317* 1.083 \alpha$

$30 = 37.87\alpha + \alpha$

$\alpha = \frac{30}{38.87 }$

$\alpha = 0.792 rad/s^2$

So the angular acceleration for first drum $\alpha = 0.792 rad/s^2$

The free body diagram of a drum and its hub when the only on the string is 30lb is shown on the third uploaded image

So here we would take the moment about O

$\sum M_o = I_O \alpha$

So $\sum M_o = 30* 1.083$

and I = M z^2

Therefore we will have

$30 * 1.083 = (Mz^2 )\alpha$

inputting values

$30 * 1.083 = 6.563 * 2.5^2 \alpha$

$32.49=41.0\alpha$

$\alpha =\frac{41}{32.49}$

$\alpha =1.262$

So the angular acceleration for the second drum is $\alpha =1.262$

Each of the two drums and connected hubs of 13-in. radius weighs 210 lb and has a radius of gyration

Answer from: Quest

answer:

explanation:

Answer from: Quest

Ireally wish i could but i will do some research and when i find the answer i will come back to assist you ; )

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers

Answers: 3

Answer

Engineering, 06.07.2019 02:30

1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction

Answers: 1

Answer

You know the right answer?

Each of the two drums and connected hubs of 13-in. radius weighs 210 lb and has a radius of gyration...

Questions