"Use VLOOKUP() to populate Row 5 (for meaningful column titles) all the way through column AY. You will be looking up column Titles based on the data (Terms) in Row 3. If you need to review the use of VLOOKUP(), please revisit Assignment 2. When you are done, your worksheet should look similar to the extract in the next screen capture."

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.