Engineering, 22.04.2020 01:20 Kay6718
For a bolted assembly, the stiffness of each bolt is kb = 4 Mlbf/in and the stiffness of the members is km = 12 Mlbf/in per bolt. The joint is subject to occasional disassembly for maintenance and should be preloaded accordingly. A fluctuating external load is applied to the entire joint with Pmax = 80 kips and Pmin = 20 kips. Assume the load is equally distributed to all the bolts. It has been determined to use / in-13 UNC grade 8 bolts with rolled threads. (a) Determine the minimum number of bolts necessary to avoid yielding of the bolts. (b) Determine the minimum number of bolts necessary to avoid joint separation. (c) Find the Goodman and Gerber safety factor.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
For a bolted assembly, the stiffness of each bolt is kb = 4 Mlbf/in and the stiffness of the members...
Questions
Mathematics, 08.10.2020 14:01
Advanced Placement (AP), 08.10.2020 14:01
Mathematics, 08.10.2020 14:01
Biology, 08.10.2020 14:01
Chemistry, 08.10.2020 14:01
Mathematics, 08.10.2020 14:01
Mathematics, 08.10.2020 14:01
English, 08.10.2020 14:01
Mathematics, 08.10.2020 14:01
Computers and Technology, 08.10.2020 14:01
