Engineering, 21.04.2020 21:49 kkmoney
The blower in the system has a 4 hp motor (fully loaded at cooling design point) with a motor efficiency of 70% located AFTER the cooling coil. Find the required temperature leaving the cooling coil to maintain room conditions. Assume all of the energy used by the blower is converted to heat. What is total cooling coil load at the design point, including the blower heat
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
The blower in the system has a 4 hp motor (fully loaded at cooling design point) with a motor effici...
Questions
Mathematics, 15.07.2019 09:30
Mathematics, 15.07.2019 09:30
Biology, 15.07.2019 09:30
Health, 15.07.2019 09:30
Biology, 15.07.2019 09:30
English, 15.07.2019 09:30
Biology, 15.07.2019 09:30
Biology, 15.07.2019 09:30
Mathematics, 15.07.2019 09:30
