subject
Engineering, 21.04.2020 18:24 aislynrae22

A cold region is maintained at the temperature TL below the environment temperature T0 by the steady operation of an irreversible refrigeration machine. The refrigeration load \dot{A_L} is attributed to the leakage of heat from T0 to TL. Prove that the total mechanical power demanded by this machine (\dot{W}) is equal to T0 times the total rate of entropy generation (\dot{S}gen), where (\dot{S}gen) equals the entropy generated by the irreversible refrigeration and by the leakage of \dog{A_L} from T0 to TL.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
question
Engineering, 06.07.2019 03:10
Air is flows through an adiabatic nozzle with an inlet pressure of 400 psia at a temperature of 300°f and a velocity of 20 ft/s. the outlet pressure is 40 psia and the velocity is 800 ftl/s. determine the outlet temperature of the air using: a) property tables b) specific heat (using the specific heat value for air at 300°f)
Answers: 3
question
Engineering, 06.07.2019 04:10
Areheat rankine cycle operates with water as the working fluid. steam enters the first turbine at 8 mpa and 450°c and exits at 0.8 mpa. it is then reheated to 400°c before entering the second turbine, where it exits at 10 kpa. if the amount of work into the pump is 8.04 kj/kg and the net work per cycle produced is 1410.25 kj/kg, determine the thermal efficiency of the cycle.
Answers: 3
You know the right answer?
A cold region is maintained at the temperature TL below the environment temperature T0 by the steady...
Questions
question
Chemistry, 04.09.2020 23:01
question
Arts, 04.09.2020 23:01