subject
Engineering, 18.04.2020 00:56 jacamron

The temperature T of a small copper sphere cooling in air is measured as a function of time t to yield the following:
t (s) 0.2 0.6 1.0 1.8 2.0 3.0 5.0 6.0 8.0
T (°C) 146.0 129.5 114.8 90.3 85.1 63.0 34.6 25.6 14.1
An exponential temperature decrease is expected from theoretical considerations.
(a) Using linear regression, obtain the exponent c and the constant C, where T = Ce^−ct represents the variation. Also, solve this problem using the polyfit function in MATLAB.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
The temperature T of a small copper sphere cooling in air is measured as a function of time t to yie...
Questions