Engineering, 17.04.2020 05:04 hjeffrey168
Replace the proportional controller with a PD controller. Design the controller such that the damped frequency, d, remains the same as the one in the original second order system and the damping ratio becomes = 0.707? h) Find the steady-state response and steady-state error of the system to a unit step input. i) How would you reduce the steady-state error of the system?
Answers: 3
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Replace the proportional controller with a PD controller. Design the controller such that the damped...
Mathematics, 12.03.2020 20:31
History, 12.03.2020 20:31
Social Studies, 12.03.2020 20:31
Chemistry, 12.03.2020 20:31