Engineering, 16.04.2020 22:30 babygirl226
A pile group is to be installed in saturated clay. Given the information below, what will be the ultimate capacity of the pile group based on the block capacity equation (Eq. 12.139 in textbook)? Clay cu=1,000 psf Pile Group: 12 piles, 3x4 group Pile Length=45 feet Pile Diameter=18 inches Pile Spacing=45 inches
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
You know the right answer?
A pile group is to be installed in saturated clay. Given the information below, what will be the ult...
Questions
Biology, 02.02.2021 01:00
Mathematics, 02.02.2021 01:00
History, 02.02.2021 01:00
Mathematics, 02.02.2021 01:00
English, 02.02.2021 01:00
Mathematics, 02.02.2021 01:00
