Assume that a surface-grinding operation is being carried out under the following conditions: D = 250 mm D=250 mm, d = 0.4 mm d=0.4 mm, v = 0.5 m / s v=0.5 m/s, and V = 50 m / s V=50 m/s. These conditions are then changed to the following: D = 150 mm D=150 mm, d = 0.4 mm d=0.4 mm, v = 0.3 m / s v=0.3 m/s, and V = 25 m / s V=25 m/s. What is the difference in the temperature rise from the initial condition?

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.