Engineering, 16.04.2020 17:31 RiyaTailz3346
Water flows at a depth of 2.20-m in a trapezoidal concrete-lined channel (kkss = 2-mm) with a bottom width of 3.6-m and a side slope of 2:1 (H:V). The longitudinal slope of the channel is 0.006% and the water temperature is 20°C. Assuming normal flow conditions, estimate the average velocity and flow rate in the channel using (a) Darcy-Weisbach and (b) Manning equations. Compare your results
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
You know the right answer?
Water flows at a depth of 2.20-m in a trapezoidal concrete-lined channel (kkss = 2-mm) with a bottom...
Questions
English, 05.03.2020 15:49
Mathematics, 05.03.2020 15:49
Mathematics, 05.03.2020 15:53
Mathematics, 05.03.2020 15:54
Geography, 05.03.2020 15:55
