subject
Engineering, 15.04.2020 23:36 anaiah13

Moist air at 27 deg C, 1atm, and 50% relative humidity enters an evaporative cooling unit operating at steady state consisiting of a heating section followed by a soaked pad evaporative cooler operating adiabatically. The air passing through the eating section is heated to 45 deg C. Next, air passing through a soaked pad exiting with 50% relative humidity. Using data from psychrometric chart, determine A) the humidity ratio of the entering moist air mixture, in kg(vapor) per kg(dry air). B) the rate of heat transfer to the moist air passing through the heating section, in kj per kg of mixture. C) The humidity ratio and temperature, in deg C at the exit of the evaporative cooling section.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
You know the right answer?
Moist air at 27 deg C, 1atm, and 50% relative humidity enters an evaporative cooling unit operating...
Questions
question
Mathematics, 31.07.2020 17:01
question
Mathematics, 31.07.2020 17:01
question
Mathematics, 31.07.2020 17:01
question
Biology, 31.07.2020 17:01