subject
Engineering, 15.04.2020 21:19 anaemigarcia

Determine the mean effective pressure of an ideal Otto cycle that uses air as the working fluid if its state at the beginning of the compression is 19 psia and 60°F, its temperature at the end of the combustion is 1500°F, and its compression ratio is 9. Use constant specific heats at room temperature. The properties of air at room temperature are R = 0.3704 psia·ft3/lbm·R, cp = 0.240 Btu/lbm·R, cv = 0.171 Btu/lbm·R, and k = 1.4.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
Determine the mean effective pressure of an ideal Otto cycle that uses air as the working fluid if i...
Questions