subject
Engineering, 15.04.2020 15:50 sweetycakes6994

Steam enters a nozzle operating at steady state at 4 MPa, 280 oC with a velocity of 70 m/s. The exit pressure and temperature are 0.7 MPa and 165.0 oC, respectively. During testing it was observed that no water condensed at the exit. The mass flow rate is 4 kg/s. Neglecting the heat transfer and potential energy, determine:(a) the exit velocity in m/s, (b) the inlet and exit flow areas.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
You know the right answer?
Steam enters a nozzle operating at steady state at 4 MPa, 280 oC with a velocity of 70 m/s. The exit...
Questions
question
Mathematics, 21.01.2021 23:10