Engineering, 15.04.2020 04:20 eduardoma2902
A solid round bar with a diameter of 2.82 in has a groove cut to a diameter of 2.541 in, with a radius of 0.142 in. The bar is not rotating. The bar is loaded with a repeated bending load that causes the bending moment at the groove to fluctuate between 0 and 25,000 lbf·in. The bar is hot-rolled AISI 1095, but the groove has been machined. Determine the factor of safety for fatigue based on infinite life using the modified Goodman criterion and the factor of safety for yielding.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
A solid round bar with a diameter of 2.82 in has a groove cut to a diameter of 2.541 in, with a radi...
Questions
Arts, 14.02.2021 22:40
Advanced Placement (AP), 14.02.2021 22:40
Mathematics, 14.02.2021 22:40
Mathematics, 14.02.2021 22:50
Mathematics, 14.02.2021 22:50
Mathematics, 14.02.2021 22:50
Mathematics, 14.02.2021 22:50
History, 14.02.2021 22:50
English, 14.02.2021 22:50
Mathematics, 14.02.2021 22:50
