Engineering, 15.04.2020 04:15 mika08
A continuous and aligned fiber-reinforced composite having a cross-sectional area of 1030 mm2 is subjected to an external tensile load. If the stresses sustained by the fiber and matrix phases are 158 and 3.84 MPa, respectively, the force sustained by the fiber phase is 70600 N, and the total longitudinal strain is 0.00117, determine the following: (a) The force sustained by the matrix phase (in N). N (b) The modulus of elasticity of the composite material in the longitudinal direction (in GPa). GPa (c) The modulus of elasticity for the fiber phase (in GPa). GPa (d) The modulus of elasticity for the matrix phase (in GPa). GPa
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A continuous and aligned fiber-reinforced composite having a cross-sectional area of 1030 mm2 is sub...
Questions
Computers and Technology, 03.08.2019 08:00
Chemistry, 03.08.2019 08:00
History, 03.08.2019 08:00
Mathematics, 03.08.2019 08:00
English, 03.08.2019 08:00
Chemistry, 03.08.2019 08:00
Biology, 03.08.2019 08:00
History, 03.08.2019 08:00
History, 03.08.2019 08:00
