A speed reducer has 20 deg full depth teeth and consisct of a 20 tooth steel spur pinion driving a 50 tooth cast iron gear. the horse power transmitted is 12 at a pinion speed of 1200 rev/min. for a dimateral pitch of 8 teeth/ in and a face width of 1.5 in find the contact stress. the yuong's modulus of the steel is 30E6 and young's modulus of cast iron is 15E6. use a poisson's ratio of 0.3 for both materials. use equation 14-14 to calc the contact stress in the gear only.

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.