Engineering, 15.04.2020 02:57 shirleyyxo
A cylindrical rod of 1040 steel originally 11.4 mm (0.45 in.) in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A coldworked tensile strength in excess of 825 MPa (120,000 psi) and a ductility of at least 12%EL are desired. Furthermore, the final diameter must be 8.9 mm (0.35 in.). Explain how this may be accomplished.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A cylindrical rod of 1040 steel originally 11.4 mm (0.45 in.) in diameter is to be cold worked by dr...
Questions
History, 27.01.2020 14:31
Biology, 27.01.2020 14:31
History, 27.01.2020 14:31
Biology, 27.01.2020 14:31
Mathematics, 27.01.2020 14:31
English, 27.01.2020 14:31
Mathematics, 27.01.2020 14:31
Chemistry, 27.01.2020 14:31
Social Studies, 27.01.2020 14:31
Mathematics, 27.01.2020 14:31
