Engineering, 14.04.2020 22:21 angelespinosa521

Determine the mean effective pressure of an ideal Otto cycle that uses air as the working fluid if its state at the beginning of the compression is 14 psia and 60°F, its temperature at the end of the combustion is 1500°F, and its compression ratio is 9. Use constant specific heats at room temperature. The properties of air at room temperature are R = 0.3704 psia·ft3/lbm·R, cp = 0.240 Btu/lbm·R, cv = 0.171 Btu/lbm·R, and k = 1.4.

Answers: 1

Show answers

Answers

Answer from: BrainGeek4848

The mean effective pressure of the ideal Otto Cycle that uses air as the working fluid is; 31.28 psia

We are given;

Initial pressure; P₁ = 14 psia

Initial temperature; T₁ = 60°F = 520 R

Maximum temperature; T₃ = 1500°F = 1960 R

Compression ratio = 9

From tables, the specific heat capacities and constants are;

c_v = 0.171 btu/lbm.R c_p = 0.24 btu/lbm.R R = 0.3704 btu/lbm.R ratio of specific heats; k = 1.4

Let us first calculate the initial volume from the formula;

V₁ = RT₁/P₁

V₁ = (0.3704 * 520)/14

V₁ = 13.7577 ft³/lb.m

Compression ratio is; V₁/V₂ = 9

Thus;

V₂ = V₁/9

V₂ = 13.7577/9

V₂ = 1.5286 ft³/lb.m

To get the temperature T₂, we will use the formula;

T₂ = T₁(V₁/V₂)^(k - 1)

T₂ = 520(9)^(1.4 - 1)

T₂ = 1252.277 R

Similarly;

T₄ = T₃/9

T₄ = 1960/(9^(1.4 - 1))

T₄ = 813.87 R

Formula for heat entering and heat exiting are;

Q_in = c_v(T₃ - T₂)

Thus;

Q_in = 0.171(1960 - 1252.277)

Q_in = 121.02 btu/lbm

Q_out = c_v(T₄ - T₁)

Q_out = 0.171(813.87 - 520)

Q_out = 50.251 btu/lbm

Net work done is given by;

W_net = Q_in - Q_out

W_net = 121.02 - 50.251

W_net = 70.769 btu/lbm

Formula for the mean effective pressure is;

mean effective pressure = W_net/(V₁ - V₂)

mean effective pressure = 70.769/(13.7577 - 1.5286)

mean effective pressure = 5.7869 btu.ft³

Converting to psia gives;

Mean effective pressure = 31.28 psia

Read more about compression ratio at; link

Answer from: jaquezdaking4919

The mean effective pressure of the Otto cycle is 31.268 psi

Explanation:

The mean effective pressure is obtained by dividing the work done in the working stroke process of the cycle by the volume of the stroke ar the stroke volume.

In the Otto cycle, therefore, we are to apply an expression for the work done and the volume of the Otto cycle stroke to derive the value of the mean effective pressure as follows.

Here we have the mean effective pressure given by

MEP $\frac{w_{net}}{\alpha _1 - \alpha_1 }$

$= \frac{Heat\, Supplied - Rejected \, Heat}{\alpha_1 -\frac{\alpha_1 }{r} }$

= $\frac{q_{in} -q_{out}}{\alpha_1-\frac{\alpha_1 }{r} }$

$=\frac{P_1}{RT_1} \frac{r}{r-1} (c_v(T_3-T_2)-c_v(T_4 - T_1))$

$=\frac{P_1}{RT_1} \frac{c_v r}{r-1} (T_3(1-r^{1-k})+T_1(1 - r^{k-1}))$

= $=\frac{14\cdot 0.171 \cdot 9}{(9-1)\cdot 0.06855 \cdot 520} (1960(1-9^{1-1.4})+520(1-9^{1.4-1}))$

31.268 psi.

Answer from: Quest

answer:

constructing a building's framework requires a solid foundation

explanation:

Answer from: Quest

Jkdjebekhrowhrvwkjrir is the season for the

Another question on Engineering

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

You know the right answer?

Determine the mean effective pressure of an ideal Otto cycle that uses air as the working fluid if i...

Questions