Engineering, 14.04.2020 21:57 ktene993

A circular loop, of loop radius λ/30 and wire radius λ/1000, is used as a transmitting/receiving antenna in a back-pack radio communication system at 10 MHz. The wire of the loop is made of copper with a conductivity of 5 .7 × 10 7 S/m. Assuming the antenna is radiating in free space, determine the:

(a) radiation resistance of the loop;
(b) loss resistance of the loop (assume that its value is the same as if the wire were straight);
(c) input resistance;

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 06.07.2019 04:20

At what temperature does the mole fraction of no reach 0.010 for the equilibrium products resulting from the combustion of gasoline and air at 1.0 and 5000 kpa?

Answers: 1

Answer

Engineering, 06.07.2019 04:20

What is the fuid acceleration in vector form for the following velocity field? note i, j, and k are unit vectors. show all of your work.

Answers: 1

Answer

You know the right answer?

A circular loop, of loop radius λ/30 and wire radius λ/1000, is used as a transmitting/receiving ant...

Questions