Engineering, 14.04.2020 23:32 kodyclancy
A well has been pumped at a steady rate for a very long time. The well has a 12-inch diameter and fully penetrates an unconfined aquifer that is 160 feet thick. Two small observation wells are 60 feet and 100 feet from the well, and the corresponding observed drawdawn are 39 and 18 feet. If the estimated hydraulic conductivity is 13 ft/day, what is the discharge?
Answers: 1
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
A well has been pumped at a steady rate for a very long time. The well has a 12-inch diameter and fu...
Mathematics, 12.11.2020 14:00
Business, 12.11.2020 14:00
Chemistry, 12.11.2020 14:00
French, 12.11.2020 14:00
Chemistry, 12.11.2020 14:00
Business, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Engineering, 12.11.2020 14:00
Biology, 12.11.2020 14:00
English, 12.11.2020 14:00
Social Studies, 12.11.2020 14:00
Chemistry, 12.11.2020 14:00
English, 12.11.2020 14:00