subject
Engineering, 14.04.2020 17:30 tessalopezgarcia2345

A strain gauge has a nominal resistance of 350 \Omega with a gauge factor of GF=1.8 and senses axial strain. The gauge is mounted on a 1.0 cm^2 aluminum rod (Modulus = 70 GPa). Output voltage is measured as E_o = 1.0 mV and the circuit is supplied at E_i = 5.00V. Solve: Assuming the bridge is balanced at no load, calculate the applied load, assuming uniaxial tension. Enter the load in N. You can assume that the gauge is arranged such that a uniaxial load will produce a positive change in voltage.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
A strain gauge has a nominal resistance of 350 \Omega with a gauge factor of GF=1.8 and senses axial...
Questions
question
Mathematics, 13.11.2020 21:30
question
Mathematics, 13.11.2020 21:30
question
Mathematics, 13.11.2020 21:30
question
Chemistry, 13.11.2020 21:30