Engineering, 09.04.2020 16:47 shanicar33500

The current source in the circuit below is given by i S (t) = 18 sin(35t +165) A. A. [6 points] Apply the phasor-domain analysis technique to determine ia (t). B. [3 points] Use the current Ia (jw) to find the complex power consumed by the 24Ω resistor. C. [2 points] Use the answer in B to find the average power consumed by the 24Ω resistor. D. [2 points] Use the answer in B to find the reactive power consumed by the 24Ω resistor. E. [2 points] Use the answer in B to find the power factor consumed by the 24Ω resistor.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

The current source in the circuit below is given by i S (t) = 18 sin(35t +165) A. A. [6 points] Appl...

Questions