subject
Engineering, 03.04.2020 22:31 ilovebeans25423

A combined cycle gas turbine / vapor power plant uses the turbine exhaust as the energy source for the boiler. Each power system uses a single turbine. The gas power system is modeled as an ideal air-standard Brayton cycle. The vapor power system is modeled as an ideal Rankine cycle. Given specific operating conditions determine the temperature and pressure at each state, the rate of heat transfer in the boiler, the power output of each turbine, and the overall efficiency.

--Given Values--
Brayton Turbine Inlet: T1 (K) = 314
Brayton Turbine Inlet: P1 (kPa) = 106
Brayton Heat Exchanger Exit: T5 (K) = 463
Brayton: rp = 11.5
Brayton: rc = 1.9
Brayton: AV (m3/s) = 1.4
Rankine Turbine Inlet: T7 (C) = 600
Rankine Turbine Inlet: P7 (MPa) = 10
Rankine Condenser Inlet: P8 (kPa) = 100

a) Determine the specific enthalpy (kJ/kg) at the compressor inlet.
Your Answer =
b) Determine the specific enthalpy (kJ/kg) at the combustor inlet.
Your Answer =
c) Determine the specific enthalpy (kJ/kg) at the gas turbine inlet.
Your Answer =
d) Determine the temperature (K) at the gas turbine inlet.
Your Answer =
e) Determine the pressure (kPa) at the gas turbine inlet.
Your Answer =
f) Determine the specific enthalpy (kJ/kg) at the gas turbine exit.
Your Answer =
g) Determine the specific enthalpy (kJ/kg) of the gas at the heat exchanger exit.
Your Answer =
h) Determine the mass flow rate of the air (kg/s) in the gas-power system.
Your Answer =
i) Determine the net-power output (kW) of the Brayton cycle.
Your Answer =
j) Determine the rate of heat transfer (kW) to the combustor.
Your Answer =
k) Determine the rate of heat transfer (kW) to the water in the boiler.
Your Answer =
l) Determine the specific enthalpy at the turbine inlet (kJ/kg).
Your Answer =
m) Determine the specific entropy (kJ/kg-K) at the turbine inlet.
Your Answer =
n) Determine the specific enthalpy at the condenser inlet (kJ/kg).
Your Answer =
o) Determine the specific enthalpy at the pump inlet (kJ/kg).
Your Answer =
p) Determine the specific enthalpy at the pump exit (kJ/kg).
Your Answer =
q) Determine the mass flow rate of the water (kg/s) in the vapor-power system.
Your Answer =
r) Determine the net power (kW) of the Rankine cycle.
Your Answer =
s) Determine the thermal efficiency (%) of the combined power plant.
Your Answer =

help a through s

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
A combined cycle gas turbine / vapor power plant uses the turbine exhaust as the energy source for t...
Questions